Toyota Corolla Dash Cam Adapter — Dongar Technologies
Toyota Corolla Dash Cam Adapter
The Toyota Corolla is the world's best-selling car nameplate of all time, and Dongar has it covered from 2019 through 2026. Whether you drive a base L, a sporty XSE, a fuel-sipping Hybrid, or the track-ready GR Corolla, there's a Dongar adapter that delivers clean, hidden dash cam power in under five minutes with zero tools.
Which Adapter Fits Your Corolla?
Your Corolla uses one of three Dongar adapters depending on the year and trim. All three are standalone products — just pick the one that matches your vehicle.
DCA-12T 2019-2022
Connects to the TSS 2.5 lane-trace assist computer underneath the plastic mirror shroud. Fits all 2019-2022 Corolla trims including L, LE, SE, XLE, XSE, LE Eco, and Hybrid LE.
DCA-16T 2023-2026
Connects to the TSS 3.0 lane-trace assist computer underneath the plastic mirror shroud. Fits all 2023-2026 Corolla trims including LE, SE, GR, Hybrid, Nightshade, and FX.
DCA-10B 2023-2026 XSE
Connects underneath the plastic mirror shroud to the auto-dimming mirror connector. Available as an alternative for 2023-2026 XSE trims only (XSE also supports DCA-16T).
Full Year/Trim Compatibility
2019-2022 Corolla (12th Generation)
| Year | Trim | Adapter | Connection |
|---|---|---|---|
| 2019 | L, LE, LE Eco, SE, XLE, XSE | DCA-12T | TSS 2.5 computer |
| 2020 | L, LE, SE, SE Nightshade, XLE, XSE, Hybrid LE | DCA-12T | TSS 2.5 computer |
| 2021 | L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex, Hybrid LE | DCA-12T | TSS 2.5 computer |
| 2022 | L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex, Hybrid LE | DCA-12T | TSS 2.5 computer |
2023-2026 Corolla (Refreshed 12th Generation)
| Year | Trim | Adapter(s) | Connection |
|---|---|---|---|
| 2023 | LE, SE, GR, Hybrid LE, Hybrid SE, Hybrid XLE | DCA-16T | TSS 3.0 computer |
| 2023 | XSE | DCA-16T or DCA-10B | TSS 3.0 or mirror |
| 2024 | LE, SE, GR, Nightshade, Hybrid LE, Hybrid SE, Hybrid XLE, Hybrid Nightshade | DCA-16T | TSS 3.0 computer |
| 2024 | XSE | DCA-16T or DCA-10B | TSS 3.0 or mirror |
| 2025 | LE, SE, FX, GR, Nightshade, Hybrid LE, Hybrid SE, Hybrid XLE, Hybrid Nightshade | DCA-16T | TSS 3.0 computer |
| 2025 | XSE | DCA-16T or DCA-10B | TSS 3.0 or mirror |
| 2026 | LE, SE, GR, Nightshade, Hybrid LE, Hybrid SE, Hybrid XLE, Hybrid Nightshade | DCA-16T | TSS 3.0 computer |
| 2026 | XSE | DCA-16T or DCA-10B | TSS 3.0 or mirror |
Connection Points Explained
🛡️ TSS Computer (DCA-12T / DCA-16T)
Shares power from the Toyota Safety Sense lane-trace assist computer located underneath the plastic mirror shroud. Does NOT connect to the mirror itself. The DCA-12T fits 2019-2022 models (TSS 2.5), while the DCA-16T fits 2023-2026 models (TSS 3.0).
🔌 Auto-Dimming Mirror (DCA-10B)
Plugs into the auto-dimming mirror connector underneath the plastic mirror shroud. Only available on XSE trims, which come equipped with the auto-dimming mirror. USB output mounts on the windshield near the mirror.
How to Install
TSS Computer Install (DCA-12T / DCA-16T)
- Tilt your rearview mirror down and carefully remove the plastic mirror shroud/cover
- Locate the TSS lane-trace computer connector (12-pin on 2019-2022, 16-pin on 2023-2026) — NOT the mirror connector
- Unplug the TSS harness
- Plug the Dongar adapter inline between the harness and TSS computer
- Route the USB-C cable behind the headliner to your dash cam
- Replace the shroud — done
Mirror Install (DCA-10B — XSE Only)
- Tilt your rearview mirror down and remove the plastic mirror shroud/cover
- Locate the 10-pin auto-dimming mirror connector — NOT the nearby TSS connector
- Unplug the mirror harness
- Plug the Dongar adapter inline between the harness and mirror
- Route the USB-C cable behind the headliner to your dash cam
- Replace the shroud — done
Dongar vs. Traditional Hardwire Kit
| Feature | Dongar Adapter | Hardwire Kit |
|---|---|---|
| Install time | ✓ Under 5 minutes | ✗ 30-60 minutes |
| Tools required | ✓ None | ✗ Fuse puller, wire strippers, trim tools |
| Warranty safe | ✓ No cutting or splicing OEM wiring | ✗ Taps into fuse box, modifies wiring |
| Hidden install | ✓ Entirely behind mirror shroud | ✗ Wires routed across A-pillar from fuse box |
| Reversible | ✓ Unplug in 30 seconds, no trace | ✗ Leaves modified fuse taps behind |
| USB-C output | ✓ True 18W USB-C PD | ✗ Usually mini-USB or barrel plug |
| Parking mode | ✓ Dongar PRO / PRO+ available | ✓ Built into most kits |
Parking Mode
Want your dash cam recording while your Corolla is parked? You have options:
Dongar PRO PMA-01
3-position switch:
• IGN — on with engine only
• Timed — 4 hours after parking
• Continuous — up to 36 hrs, 11.8V cutoff
Includes multiple harnesses in one box. Select the harness that matches your Corolla's connection point.
Dongar PRO+ PRS-01
OLED display + one-button menu:
• Custom voltage cutoff (0.01V precision)
• Custom timer (hrs + mins, default 8hr)
• Energy Budget mode (Eco/Normal/Heavy)
• 5V always-on + Parking Mode CC for Viofo/RedTiger
Same harnesses as PRO. Swap module & mount if upgrading.
Frequently Asked Questions
Which Dongar adapter do I need for my Corolla?
2019-2022 (all trims): DCA-12T. 2023-2026 (all trims except XSE): DCA-16T. 2023-2026 XSE: DCA-16T or DCA-10B (your choice — both work). All three are standalone products. Use the Compatibility Finder to confirm your exact year and trim.
What changed between the 2022 and 2023 Corolla that requires a different adapter?
Toyota upgraded the Toyota Safety Sense system from TSS 2.5 to TSS 3.0 for the 2023 model year refresh. The TSS 2.5 computer uses a 12-pin connector (DCA-12T), while TSS 3.0 uses a 16-pin connector (DCA-16T). The connectors are physically different sizes and are not interchangeable.
Does the Dongar adapter work with my Corolla Hybrid?
Yes. The Dongar adapter works identically on gas and hybrid Corollas. Both use the same TSS computer connector. 2020-2022 Hybrid LE uses the DCA-12T. 2023-2026 Hybrid LE/SE/XLE/Nightshade use the DCA-16T. The hybrid battery system is completely separate from the 12V accessory circuit that powers the adapter.
Will installing a Dongar adapter affect my Toyota Safety Sense features?
No. The Dongar adapter is a pass-through — it taps a small amount of power from the TSS computer's circuit while passing all data signals through unchanged. Lane departure alert, pre-collision braking, adaptive cruise control, and all other TSS features continue to function normally. The adapter draws less than 18W, well within the circuit's capacity.
Can I use a Dongar on my GR Corolla?
Yes. The GR Corolla (2023-2026) uses the DCA-16T, same as all other 2023+ Corolla trims. The GR's performance upgrades are drivetrain-related — the TSS 3.0 computer and mirror area are the same as the standard Corolla.
What dash cams work best with the Dongar adapter on a Corolla?
Any USB-C powered dash cam works with Dongar's 18W output. Popular choices for Corolla owners include Garmin Dash Cam Mini 2/Mini 3 (compact, reliable), Viofo A229 Plus (great value 2-channel), and Nexar One Pro (cloud-connected). For Viofo and RedTiger cameras, the Dongar PRO+ is recommended for proper parking mode detection.
Installation Resources
| Product | Install Pamphlet (PDF) |
|---|---|
| DCA-12T (12-Pin TSS 2.5, 2019-2022) | Download PDF |
| DCA-16T (16-Pin TSS 3.0, 2023-2026) | Download PDF |
| DCA-10B (10-Pin Mirror, 2023-2026 XSE) | Download PDF |
| Dongar PRO (PMA-01) | Download PDF |
| Dongar PRO+ (PRS-01) | Download PDF |
As Featured In
TechRadar: "This ingenious adapter is the dash cam installation hack I've been waiting for"
autoevolution: "Dongar Dashcam Adapters Are the Automotive Accessory You Didn't Know You Needed"
Ready to Install?
Find Your Corolla Adapter Shop Dongar PRO Shop Dongar PRO+
Related Vehicle Guides
Toyota Camry • Toyota RAV4 • All Toyota Adapters • Mirror Tap vs Hardwire Kit • PRO Installation Guide