NaN
/
von
-Infinity
Dongar
USB-HARDWIRE-KIT
Universelle Passform
Normaler Preis
$24.99 USD
Normaler Preis
$29.99 USD
Verkaufspreis
$24.99 USD
Grundpreis
/
pro
Versand wird beim Checkout berechnet
Dieses Kit enthält:
- Dongar 12V-to-USB Module (10.5 foot cable)
- Drei (3) kurze USB-Kabel (MicroUSB, MiniUSB und USB-C)to adapt to any needed USB input
- 4 add-a-fuse adapters
- 4 3A fuses
- 1 pry tool for easy installation
Verfügbarkeit für Abholungen konnte nicht geladen werden
- Kostenloser Economy-Versand (nur USA)
- Bezahlen Sie Ihren Weg
- 30-tägiges Rückgaberecht
Aktie

Mit Absicht entworfen
Unser USB-Hardwire-Kit wurde entwickelt, um beispiellose Flexibilität zu bieten und die Verwendung jedes USB-betriebenen Geräts in jedem Fahrzeug zu ermöglichen. Dieses Kit verfügt über ein einzigartiges, montierbares 12-V-zu-USB-Modul und zeichnet sich durch sein elegantes und stromlinienförmiges Design aus.

Das komplette Installationsset beinhaltet:
- Dongar 12V-zu-USB-Modul
- Drei (3) kurze USB-Kabel (MicroUSB, MiniUSB und USB-C) zur Anpassung an jeden benötigten USB-Eingang
- 4 Add-a-Fuse-Adapter
- 4 3A-Sicherungen
- 1 Hebelwerkzeug zur einfachen Installation
How-to-Hub
-
Holen Sie sich Hilfe bei der Installation.
Besuchen Sie das Hilfecenter
5
2 Rezensionen
5
(2)
4
(0)
3
(0)
2
(0)
1
(0)
Teilen Sie Ihre Erfahrungen
C
Cameron M.
Verifizierter Käufer
I used the USB Hardwire Kit to install a Garmin X110 dahscam on a 2016 Silverado. Very straightforward installation. The only challenge is finding the correct fuse.
R
Rob B.
Verifizierter Käufer
The product worked fine, and installed easily enough. It was reasonably priced for what you get.
Note that the installation directions are "sparse" leaving out steps like transferring the fuse you took out to their tap, connecting ground wire, etc.
Even though example directions were for the exact vehicle I was installing, it certainly wasn't a step by step instruction. I moved camera to passenger side to get it out of way of driver interfering with view / mirror, this worked well. I applied tape of USB adapter to glass to avoid extra wiring showing. It's bad enough the camera used has connections on top side that push mount farther down.
I dislike having to leave off the fuse box cover to add this tap, and have to make sure to keep it around so I know what fuse is what.
Dongar's provided fuse puller didn't work in close fuse spacing, had to use the one provided in underhood fuse box.

