Porsche 911 Installation (Keyway 2)

Items Needed:

  • Dongar Technologies 3-Pin Key Way 2 Dash Cam Power Adapter
  • USB-powered dash cam
  • Plastic pry tool (included in purchase)

INSTRUCTIONS:

  1. Tilt the mirror down and to the side.
  2. Remove the plastic panel by wedging something like a credit card into the panel gap and unclipping the snap-fit joints.
  3. There's a small connector that's still attached to the plastic panel once unclipped. Please note that this wiring harness powers the dome light and provides constant power.
  4. Remove the connector by simply pulling straight out.
  5. Attach the 3-pin Porsche (Keyway 2) Dongar dash cam adapter.
  6. Route the cable thru the front of the shroud and re-install the plastic panels.
  7. Attach the USB powered dash cam to the Dongar adapter - Installation complete!