2022 Porsche 718 Boxster T Installation

Items Needed:

  • Dongar Technologies 3-Pin Key Way 1 Dash Cam Power Adapter
  • USB-powered dash cam
  • Plastic pry tool (included in purchase)

INSTRUCTIONS:

  1. Tilt the mirror down and to the side.
  2. Remove the plastic panel by wedging something like a credit card into the panel gap and unclipping the snap-fit joints.
  3. Remove the connector that's still attached to the plastic panel.
  4. Locate the 3-pin connector within the plastic shroud.
  5. Remove the connector by pulling straight out. If connector does not dislodge, pushing in the lock tab using needle nose pliers and pulling straight out.
  6. Attach the 3-pin Dongar dash cam adapter.
  7. Route the cable thru the front of the shroud and install the plastic shroud back on.
  8. Attach the USB powered dash cam to the Dongar adapter - Installation complete!

Installation Examples: