2022 Chrysler 300S Installation

Dash Cam Power Adapter (10-Pin Type D) for Select Dodge - Dongar Technologies LLC

Items Needed:

  • Dongar Technologies 10-Pin Type D Dash Cam Power Adapter
  • USB-powered dash cam

  1. Tilt the mirror down for better access
  2. The Chrysler 300 has a 2-panel plastic shroud. Use a trim removal tool to remove the inside plastic panel. This piece is held in place by 4 tabs.
  3. The outer panel is held in place by 2 tabs. To remove this, simply push the entire assembly to the left or right and pull down on one side. This should allow the assembly to come off.
  4. Locate the connector port on the mirror.
  5. Press up on the tab and pull the connector straight out.
  6. Attach the Dongar dashcam adapter. This particular vehicle requires a 10-pin Type D adapter.
  7. Route the cables accordingly and re-assemble the plastic shroud.
  8. Attach the USB powered dash cam to the Dongar adapter - Installation complete!

Installation Examples: