2024+ Toyota Tacoma Installation (Roof)

Dash Cam Power Adapter (5 - Pin Type A) for Select Toyota/Lexus with Roof Option Connector - Dongar Technologies LLC

Items Needed:

  • Dongar Technologies 5-Pin Type A Dash Cam Power Adapter
  • USB-powered dash cam

INSTRUCTIONS:

  1. Remove the domelight assembly by placing your fingers at the front of the assembly (closer to windshield) and gently pulling down.
  2. Locate the 5-pin connector port within the domelight cavity and connect the 5-Pin harness to it. Route the 3-pin end of the same harness through the headliner.
  3. Connect the 3-pin head to the Dongar USB module and plug your dash cam in to the USB port. Turn [ON] your vehicle and ensure the dash cam is receiving power.
  4. Once you have confirmed the dash cam is receiving power, mount the dash cam and Dongar adapter on a clean spot on the windshield and re-assemble the plastic shroud.

Installation Examples: