2024+ Toyota Tacoma Installation (Rearview Mirror)

Items Needed:

Tilt your mirror down for easier access to mirror shroud and back of the mirror. Remove the shroud by placing your fingers between the headliner and smaller panel piece and pulling straight down. (The larger panel can be removed by sliding it down and away from you.)
Locate and unclip the mirror's connector. Then, plug the matching 10-Pin male end of the Dongar harness into the mirror's female port.
Plug the male end of the original mirror connector into the female end of the Dongar harness. Plug the smaller 3-pin head into the Dongar USB module.
Connect your dash cam to the USB port on the Dongar module. Turn [ON] your vehicle and ensure the dash cam is receiving power. Once you have confirmed the dash cam is receiving power, mount the dash cam and Dongar adapter on a clean spot on the windshield.
Route the cables accordingly and re-assemble the plastic shroud.