2nd Generation Toyota Tacoma Installation

Items Needed:

  • Dongar Technologies 14-Pin Type A Dash Cam Power Adapter
  • USB-powered dash cam

INSTRUCTIONS:

  1. Tilt the mirror down for better access to the plastic wire cover.
  2. Pry off the upper portion of the wire cover.
  3. Locate the connector port and disconnect by pushing down on the tab and pulling straight out.
  4. Install the Dongar dash cam adapter. The 2nd Gen Tacoma uses a 14-pin Dongar dash cam adapter.
  5. Tidy up the cables and re-assemble the wire cover.
  6. Attach the USB powered dash cam to the Dongar adapter - Installation complete!

Installation Examples: