2022 Ford Ranger Installation

Items Needed:

  • Dongar Technologies 3-Pin Type B Dash Cam Power Adapter
  • USB-powered dash cam


  1. Tilt the mirror down for better access to the plastic panels above the rearview mirror.
  2. Remove the upper plastic panel by prying it gently down using your fingers. This panel is held in place by 2 snap-fit joints.
  3. Locate the 3-pin connector port on the vehicle. Press down on the tab and pull the connector straight out.
  4. Attach the Dongar dash cam adapter. This vehicle uses a 3-pin Dongar adapter.
  5. Route the cables and install the plastic panel back on.
  6. Attach the USB powered dash cam to the Dongar adapter - Installation complete!

Installation Examples: