2019 Toyota Tacoma Installation

Dash Cam Power Adapter (12-Pin Type A) for Select Toyota/Honda/Subaru/Infiniti - Dongar Technologies LLC

Items Needed:

  • Dongar Technologies 12-Pin Type A Dash Cam Power Adapter
  • USB-powered dash cam

INSTRUCTIONS:

  1. Tilt the mirror down and to the side for better access.
  2. Locate the wiring going into the back of the rearview mirror.
  3. Remove the connector by simply pushing down on the tab and pulling straight out.
  4. Install the 12-pin Dongar dash cam adapter designed for 3rd Generation Toyota Tacoma vehicles (2016+).
  5. Tidy up the cables and attach the USB powered dash cam to the Dongar adapter - Installation complete!

Installation Examples: