Dongar Technologies 5-Pin Type A Dash Cam Power Adapter
USB-powered dash cam
INSTRUCTIONS:
Remove the domelight assembly by placing your fingers at the front of the assembly (closer to windshield) and gently pulling down.
Locate the 5-pin connector port within the domelight cavity and connect the 5-Pin harness to it. Route the 3-pin end of the same harness through the headliner.
Connect the 3-pin head to the Dongar USB module and plug your dash cam in to the USB port. Turn [ON] your vehicle and ensure the dash cam is receiving power.
Once you have confirmed the dash cam is receiving power, mount the dash cam and Dongar adapter on a clean spot on the windshield and re-assemble the plastic shroud.
Installation Examples:
Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.
